Home > Products > Auxiliary Equipment and Gold Furnace > Details

Split Type Max Dual Sliding Rtp Tube Furnace for Molybdenum Disulfide (MOS2) Research

split type Max Dual Sliding RTP Tube Furnace for molybdenum disulfide (MoS2) research This set of equipment is split vac;

Send inquiry

Basic Info.

Model NO.	CY-1200-80IIIC
Vacuum Sealing Flange	Stainless Steel
Warranty	One Year
Gas System	Mass Flow Meter
Heating Rate	20c/Min.
Heating Zone	Three
Transport Package	Wooden Box
Specification	OD. 80x1400mm
Trademark	CY
Origin	Zhengzhou, China
HS Code	85141090
Production Capacity	140 Sets/Month

Product Description

split type Max Dual Sliding RTP Tube Furnace for molybdenum disulfide (MoS2) research
This set of equipment is split vacuum tube furnace and the front end is equipped with pre - heater heated to 400 ºC, the auxiliary sulfur powder evaporation, the rear end of the dual-zone curing oven, precise temperature control, easy to operate. .The left side is equipped with a flange support,preheater and sulphur furnace can be used separately.Right side is equipped with atmosphere micro-adjustment device,which can accurately reflect the gas pressure in the chamber.The regulating valve with a scale,used for low pressure CVD, is very practical and good repeatability.
Technical parameter

Furnace Construction	Double layer steel casing with air cooling High purity alumina fiber insulation for max. energy saving Splitable cover for easy tube replacement
Power Consumption	5 KW
Input Voltage	AC 208-240V Single Phase, 50 or 60 Hz
Maximum Temperature	1200 C
Continuous Temperature	1100 C
Maximum Heating Rate	<= 20 C /min
Heating Zone Length	Three zones: (880mm, 35" in total)Zone 1: 220mm (8.6" )Zone 2: 440mm (17.3")Zone 3: 220 mm (8.6")
Constant Temperature Zone	If three zones are set at the same temperature, constant temperature zone is 25" (625 mm) long with a temperature discrepancy of +/- 1oC.If using only one zone (center zone), constant temperature zone is 4.3" (110 mm) long with a temperature discrepancy of +/- 1oC.
Temperature Accuracy	+/- 1oC
Heating Elements	Fe-Cr-Al Alloy doped by Mo
Temperature Controller	Three precision temperature controllers to control three zones separately.PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.Built in overheating & broken thermocouple protection.Over temperature protection and alarm allows for operation without attendant(s).+/- 1 C temperature accuracy.RS485 Communications Port..
Quartz Tube& Sealing Flanges	80 mm O.D x 72 mm ID. x 1400 mm fused quartz tube included. Vacuum flanges with valves and pressure gauge are included. Thermal block must be placed inside tube as the drawing below
Vacuum Sealing Flanges	Two stainless steel flanges with both vacuum gauge and valves included.Min. vacuum pressure achieved by mechanical pump is 5.5 m-torr. ( 5.5x10^-3 torr). The pressure can reach 10^-5 torr by using mechanical + molecular pump.Leaking rate is < 5 m-torr / min. and stable vacuum pressure after 24 hours is < 2 torr.
Oxygen Monitoring	An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation. Please click the picture below to learn more:
Vacuum Pump	120 L/m Rotary Vane Vacuum Pump is included with max. vacuum pressure of 10^-2torr. Stainless steel hose tube is included for connecting to tube furnace.
Gas Flow Meter and Pressure Meter	Three gas flow-meters (4% accuracy FS) are installed inside the mobile case to enable monitoring of gas flowing rates Compact direct read flow meter, 10-100 cc/min.Compact direct read flow meter, 16-160 cc/min.Compact direct read flow meter, 25-250 cc/min.
Valves	Four stainless steel valves are installed in the side panel of mobile cart to control mixing of three inlet gases separately
Dimensions	Furnace: 1100 X 450 x 670 mmBottom Mobile case: 600x600x597 mm

Split Type Max Dual Sliding Rtp Tube Furnace for Molybdenum Disulfide (MOS2) Research

PackageService
1. Factory prices with the best quality.
2. One year free-of-charge maintenance for all the dental equipment
3. Customized service for special demand
4. Fast and flexible delivery, by sea, by air, by express
5. Quick response within 24 hours
How to order
1. If you are interested in our products, please tell us the model number and quantity.
2. We will make a proforma invoice for your order.
3. We will deliver the product ASAP on receipt of the payment
Guarantee
1. Guarantee for one year after shipment.
Payment
1. Western Union
2. PayPal
3. Secure Payment through Alibaba
4. Telegraphic transfer
5. L/C
Factory
Zhengzhou CY Scientific Instrument Co., Ltd is mainly engaged in the research and development, design, manufacturing and sales of equipment used in scientific researches. Independence and innovation is the company's tenet.Our main products include: tube furnace, muffle furnace, plasma cleaner, vacuum furnace, atmosphere furnace,CVD system and customized lab equipment.Welcome you come to visit us.

Split Type Max Dual Sliding Rtp Tube Furnace for Molybdenum Disulfide (MOS2) Research

Exhibition

Previers

Back to list

Send inquiry

Send now