Petroleum Product Lubricating Oil Lube Pour Point Solidifying Point Test Lab Equipment

Basic Info.

Product Description

Insulating oil pour point tester Oil Pour point Tester
I. Automatic Oil Pour Point Tester Overview

VS-9612Pour Point Tester is designed and manufactured according to national standard GB / T3535 and American Society for Testing and Materials ASTM D97. The instrument is suitable for the determination of pour point of petroleum and petroleum products under this standard.

II. Automatic Oil Pour Point Tester the structural characteristics

VS-9612pour point detector is arranged up and down, one-piece low-temperature instruments, which mainly by the cooling system and cold bath temperature control system and other components.
Refrigeration system is fully enclosed cascade compressors, assembled by our mature refrigeration technology, low energy consumption and long service life. Refrigeration systems include compressors, condensers, evaporative condensers, throttling capillaries and evaporators.
Cold bath temperature control system uses digital thermostat temperature bath temperature control, the use of digital temperature controller can visually display the set temperature and the actual temperature, easy to set the temperature and temperature correction.

III. Automatic Oil Pour Point Tester the technical parameters

Implement standard GB/T3535, GB/T510,ASTM D97,ASTM D5853 ;

Range: room temperature ~ -45 ºC;

Accuracy:±0.1ºC

Display: digital tube display;

Test mode: automatic temperature control, manual test;

Temperature sensor: PT100 platinum resistance;

Test hole:Two holes.

Cooling rate: not less than 70 ºC / h

Refrigeration mode: compressor refrigeration;

Power: 1500W;

Power supply voltage: AC220V 50Hz;

Applicable environment: temperature 40 ºC or less moisture 80% or less

Instrument weight: about 40KG.

Packing List